0 Reviews
View Product Reviews125mm Xtratherm CavityTherm Full Fill Wall Insulation Board T&G 1200mm x 450mm (54m2/Pallet)
Product Overview
Delivery & Returns Information
All delivery charges are shown in your basket and are dependent on the total value of items in your basket based on product category.
Standard (Nationwide) Delivery
ORDER VALUE | DELIVERY CHARGE |
---|---|
Insulation, Plasterboard and Drylining Products | |
Under £150 ex. VAT | £75 ex. VAT |
Between £150 - £300 ex. VAT | £50 ex. VAT |
Over £300 ex. VAT | FREE |
Timber & Sheet, Building Materials, Doors & Joinery and Gardens & Landscaping Products | |
Under £300 ex. VAT | £25 ex. VAT |
Over £300 ex. VAT | FREE |
Screws & Fixings and Adhesives & Sealants | |
Under £100 ex. VAT | £7.50 ex. VAT |
Over £100 ex. VAT | FREE |
SuperFOIL and YBS products | |
Each item | £10 ex. VAT |
Over £350 ex. VAT of 1 brand | FREE |
Express Delivery
ORDER VALUE | DELIVERY CHARGE |
---|---|
Under £300 ex. VAT | £75 ex. VAT |
Over £300 ex. VAT | £50 ex. VAT |
This charge is based on delivery to mainland UK excluding the Scottish Highlands. If your delivery address is in the Scottish Highlands a member of our customer service team will contact you prior to processing your order should an additional delivery charge apply. We do not offer deliveries outside the UK mainland.
Returns
We offer a 30 day returns policy on any faulty products.
Technical Specification
Material Type: | PIR |
---|---|
Thickness: | 125mm |
Width: | 450mm |
Length: | 1200mm |
Pieces Per Pack: | 4 |
Packs Per Pallet: | 25 |
Sales Unit: | Pallet |
Sales Unit Coverage: | 54m2 |
Brand: | Xtratherm |
Manufacturer's Reference: | CT/PIR125 |
Thermal Conductivity: | 0.021W/mK |
Technical Downloads
125mm Xtratherm CavityTherm Full Fill Wall Insulation Board T&G is a polyiso-based full fill cavity solution for masonry walls. Comprising a rigid PIR core, it delivers a very low thermal conductivity rating of just 0.021 W/mK.
This makes it a better themal performer than all other full fill cavity PIR solutions on the market. CavityTherm insulation boards have tongue and groove protusions and recesses on all four sides, which means they fit together snugly.
This helps to prevent thermal bridging and reduces the impact of wind driven rain. The boards are flanked on either side by gas tight aluminium facings which assist with heat retention. The Xtratherm full fill boards are 1200mm x 450mm in size, and are specifically designed to fit between brick ties installed at traditional spacings.
The 125mm boards are sold in plastic wrapped packs.