How Do I Use Knauf Plasterboard Adhesive?

Knauf plasterboard adhesive is a multi-purpose highest quality gypsum-based bonding agent that allows for the bonding of Knauf plasterboard and insulating laminates.In order to make use of this: First, mix 10kg of plasterboard adhesive gradually into a clean bucket containing 5 litres of clean waterThe plasterboard adhesive should be left for three minutes before being mixed into a smooth consistencyWe recommend using a power-mixing tool for mixing as long as the speed is low and the revolutions per minute are kept below 200rpm

Knauf Plasterboard: Which Side To Plaster?

The grey side is the one to plaster finish as this is the easiest side to apply the bonding adhesive and plaster to. It would still be possible to apply the plaster finish to the other side but it wouldn’t necessarily provide the same level of results. So, for the best result for your project, we recommend that only the grey side is plastered.There is much debate in DIY forums on whether this is something that matters when it comes to Knauf plasterboard but we believe that the best results are achieved by using the grey side for the plaster finish.

Is There An Installation Guide For Knauf Plasterboard?

As a company, Knauf is excellent at providing support for all of their products and they have various comprehensive guides available on their very informative website. If you get stuck on how best to proceed with your project we would highly recommend that you take a look at their comprehensive series of guides as we are sure you will find the answers you are looking for there.To ensure the best performance, use in conjunction with Knauf jointing compounds, finishes, fixings, plasterboard adhesive and metal systems.If you are storing the boards for some time before installing, ensure that boards are stored flat and protected from inclement weather.