-
-
Shop by Brand
arrow_drop_down
- Actis
- ARC
- Ballytherm
- Blue Circle
- Bostik
- Breedon
- British Gypsum
- Celcon
- Celotex
- Cembrit
- Cemex
- Danosa
- EcoTherm
- European Steel Profiles
- Everbuild
- Evo-Stik
- Expamet
- Fermacell
- Fibran
- Fillcrete
- Forterra
- Hadley
- Hanson
- Ibstock
- IKO
- Isover
- Jablite
- JamesHardie
- Kay Metzeler
- Kingspan
- Knauf Drywall
- Knauf Insulation
- Libra
- Magply
- Novia
- OX Tools
- Polyfoam
- Pozament
- Quinn Cement
- Quinn Lite
- Quinn Therm
- RCM
- Recticel
- Remix
- Resistant Building Products
- Rockwool
- Rugby
- Sika
- Siniat
- Soudal
- SPI
- Springvale
- SuperFOIL
- Superglass
- Superior Sections
- Tarmac
- Tetrion
- Thermalite
- TLX
- Toupret
- Ursa
- Visqueen
- Wienerberger
- Xtratherm
- YBS
-
Shop by Brand
arrow_drop_down
close
Item(s) added to your
URN:
Xtratherm
Show more
Xtratherm XT/UF Floor PIR Insulation Board 2400mm x 1200mm
Xtratherm XT/UF Floor PIR Insulation Board 2400mm x 1200mm
The floor in any building is an area of considerable downward heat loss when not properly insulated. XT/UF will significantly improve the U-value of new and existing floors. Thin-R Underfloor XT/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.
Show more
Xtratherm CavityTherm Full Fill Wall Insulation 1200mm x 450mm
Xtratherm CavityTherm Full Fill Wall Insulation 1200mm x 450mm
Xtratherm CavityTherm is a high performance composite board of enhanced PIR with a lambda value of 0.021 W/mK, for full fill cavity wall applications. CavityTherm has gas tight facings with one face bonded to a profiled HIPS skin during manufacture to provide a drainage plane.
Show more
Xtratherm XT/PR Pitched Roof Insulation Board
Xtratherm XT/PR Pitched Roof Insulation Board
Thin-R Pitched Roof XT/PR on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-values with minimal intrusion into valuable living space. The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XT/PR will reduce heat loss while also delivering excellent thermal bridging details. Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above - or above and between - the roof timbers ensures that the structure is kept at or near the internal environmental conditions, reducing thermal stress and condensation risk.
Show more
Xtratherm XT/TL Insulated Plasterboard 2400mm x 1200mm
Xtratherm XT/TL Insulated Plasterboard 2400mm x 1200mm
Thin-R Thermal Liner Dot & Dab XT/TL is a composite insulated panel of Xtratherm PIR insulation core with a composite kraft facing bonded to 12.5mm tapered edge plasterboard for internal applications, fixed with proprietary adhesive bonding. The composite kraft facing on both sides of XT/TL incorporates an integral vapour control layer, which helps to reduce the risk of condensation.
Show more
Xtratherm XT/CW Cavity Wall Insulation T&G 1200mm x 450mm
Xtratherm XT/CW Cavity Wall Insulation T&G 1200mm x 450mm
Thin-R Partial Fill Cavity Wall XT/CW (T&G) builds to a system thanks to its engineered tongue and grooved joints and pre-formed corners, ensuring insulation continuity and minimisation of thermal bridging. XT/CW (T&G) for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Show more
