12.5mm Siniat GTEC Standard Board Tapered Edge Plasterboard 2700mm x 1200mm

URN: 2001054
£9.46ex. VAT £2.92 per m2
£9.46ex. VAT
£2.92 per m2
Bulk Discount
55+ sheets 80+ sheets 110+ sheets
£9.37ex. VAT £9.27ex. VAT £9.18ex. VAT
12.5mm Siniat GTEC Tapered Edge Plasterboard (2700mm x 1200mm) is your typical gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings.

Nationwide Delivery

Fri 9 Dec

Product Overview

12.5mm Siniat GTEC Tapered Edge Plasterboard (2700mm x 1200mm) is your typical gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings.

12.5mm Siniat GTEC Standard Board Tapered Edge Plasterboard 2700mm x 1200mm

URN: 2001054
£9.46ex. VAT

Delivery & Returns Information

All delivery charges are shown in your basket and are dependent on the total value of items in your basket based on product category.

Standard (Nationwide) Delivery

ORDER VALUE DELIVERY CHARGE
Insulation, Plasterboard and Drylining
Under £150 ex. VAT £75 ex. VAT
Between £150 - £300 ex. VAT £50 ex. VAT
Between £300 - £500 ex. VAT £25 ex. VAT
Over £500 ex. VAT FREE
Building Material Products
Under £300 ex. VAT £50 ex. VAT
Between £300 – £500 ex. VAT £25 ex. VAT
Over £500 ex. VAT FREE
Accessories
Under £100 ex. VAT £7.50 ex. VAT
Over £100 ex. VAT FREE
SuperFOIL and YBS products
Each item £10 ex. VAT
Over £350 ex. VAT of 1 brand FREE

Express Delivery

ORDER VALUE DELIVERY CHARGE
Under £300 ex. VAT £75 ex. VAT
Over £300 ex. VAT £50 ex. VAT

This charge is based on delivery to mainland UK excluding the Scottish Highlands. If your delivery address is in the Scottish Highlands a member of our customer service team will contact you prior to processing your order should an additional delivery charge apply. We do not offer deliveries outside the UK mainland.

View Full Delivery Policy

Returns

We offer a 30 day returns policy on any faulty products.

View Full Returns Policy

Key Features

  • Easy to install, handle and cut
  • Can be fixed using screws or by dot and dabbing with plasterboard adhesive
  • Suitable for direct decoration
  • High resistance to deformation
  • Cost-effective choice for reducing noise transmission
  • Suitable for gypsum finishing plasters
  • Sheet Sales Unit Coverage : 3.24m2

Technical Specification

Technical Specification
Thickness:12.5mm
Width:1200mm
Length:2700mm
Pieces Per Pallet:72
Sales Unit:Sheet
Sales Unit Coverage:3.24m2
Brand:Siniat
Manufacturer's Reference:90610
Weight:8.4kg/m2
Thermal Conductivity:0.19W/mK
Edge:Tapered

Product Description

Applying wet plaster can be a long and stressful process, especially when you factor in drying times and all the fiddling that comes with trying to achieve the perfect smooth finish. GTEC Standard Board ensures you can simply install and crack on with decorating - no wait times and no hassle. 

Available in both square or tapered edges, these tapered edge boards are suitable to receive gypsum plaster finish and are ideal for both jointing and skimming, creating an invisible seam at the point where the edges meet.

Comprising an aerated calcium sulphate core enclosed encased in a tough paper with bound edges (bound by a PVA edge glue), GTEC 12.5mm Tapered Edge Plasterboards measure 2400 x 1200 x 12.5mm and are a hassle-free alternative to traditional lath and plaster processes, helping you to meet normal fire, structural and acoustic level requirements in partitions, linings and ceilings.


12.5mm Siniat GTEC Standard Board Plasterboard Tapered Edge Applications

Drylining has never been easier with GTEC Standard Board. GTEC gypsum board ensures partitions, linings and ceilings are drylined to a professional standard every time. You do not need to be a professional to do a good job of installing it. So long as you have patience and time on your hands, installing plasterboard is more than doable for beginners and seasoned builders alike.

We recommend GTEC Standard Plasterboard for the following applications where normal fire, structural and acoustic levels are specified: 

  • Metal and Timber partition wall applications
  • Wall linings
  • Ceiling applications


12.5mm Siniat GTEC Standard Board Tapered Edge Specifications

Drylining is a doddle when you're working with 12.5mm Siniat GTEC Standard Board. GTEC gypsum boards are a piece of cake to apply unlike traditional lath and plaster; once the boards are installed, you can immediately go about painting and decorating - no hanging around. The boards are suitable for direct application and decoration and feature an ivory paper face that accepts a wide range of paint and finishing products. The boards are suitable for drylining partitions, linings and ceilings where normal fire, structural and acoustic levels are specified.

Let's dive into the specs:

  • Available for new builds or refurbishments
  • Easy to install, handle and cut
  • Can be fixed using screws or by dot and dabbing with plasterboard adhesive
  • Suitable for direct decoration
  • High resistance to deformation
  • Cost-effective choice for reducing noise transmission, particularly airborne sounds such as speech 
  • Suitable for gypsum finishing plasters
  • Available in a wide range of sizes to minimise waste
  • Technical Specification Thickness : 12.5mm
  • Sheet Sales Unit Coverage : 3.24m2


For further details, please refer to the manufacturer datasheet in 'Technical Downloads'.

12.5mm Siniat GTEC Standard Board Tapered Edge Certifications

  • Fire Reaction Class: A2-s1,d0
    Complies with BS EN 520:2004+A1:2009 Type A
    Water Vapour Resistance Factor: µ = 10 to BS EN 12524
    Nail & screw pull through: > 300 N

12.5mm Siniat GTEC Standard Board Tapered Edge Jointing & Finishing

  • GTEC Standard Board is designed to and should be jointed and finished with GTEC Jointing Systems
    Boards are suitable for gypsum finishing plasters which are manufactured to BS EN 13279-1:2008
    Ivory face is purposed for decorating - boards should be primed with GTEC Universal Sealer before decorating

Square Edge & Tapered Edge - What's The Difference?

Tapered edge boards are suitable for taping and jointing to achieve a flush finish or for a single coat gypsum plaster finish.

We recommend using square edge boards for textured finishes or undecorated applications. They are also purposed to receive a gypsum plaster finish.

About Siniat

Siniat is one of three main manufacturers of plasterboard in the UK and forms part of the 60-brand strong, industrial group Etex. Siniat manufacturers drywall products and systems for partitions, ceilings, wall linings and external sheathing purposes. Showcasing a vast range of products which reflect a host of projects and budgets, you can be certain that when you choose Siniat, you are investing in years of experience and expertise.

Reviews

5
4
3
2
1
0/5 based on 0 reviews

Leave a Review