0 Reviews

0
View Product Reviews

12.5mm Siniat GTEC Standard Board Tapered Edge Plasterboard 2400mm x 1200mm

URN: 2001051

Select Thickness

£8.99ex. VAT £3.12 per m2
£8.99ex. VAT
£3.12 per m2
12.5mm Siniat GTEC Tapered Edge Plasterboard (2400mm x 1200mm) is your typical gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings.

Select Thickness

Nationwide Delivery

Wed 14 Jun

Product Overview

12.5mm Siniat GTEC Tapered Edge Plasterboard (2400mm x 1200mm) is your typical gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings.

12.5mm Siniat GTEC Standard Board Tapered Edge Plasterboard 2400mm x 1200mm

URN: 2001051
£8.99ex. VAT

Delivery & Returns Information

All delivery charges are shown in your basket and are dependent on the total value of items in your basket based on product category.

Standard (Nationwide) Delivery

ORDER VALUE DELIVERY CHARGE
Insulation, Plasterboard and Drylining Products
Under £150 ex. VAT £75 ex. VAT
Between £150 - £300 ex. VAT £50 ex. VAT
Over £300 ex. VAT FREE
Timber & Sheet, Building Materials, Doors & Joinery and Gardens & Landscaping Products
Under £300 ex. VAT £25 ex. VAT
Over £300 ex. VAT FREE
SuperFOIL and YBS products
Each item £10 ex. VAT
Over £350 ex. VAT of 1 brand FREE
Screws & Fixings and Adhesives & Sealants
Under £100 ex. VAT £7.50 ex. VAT
Over £100 ex. VAT FREE
Thermafleece CosyWool Roll & SupaSoft Insulation
1 £30 ex. VAT
2 £60 ex. VAT
3 to 12 £70 ex. VAT
13 to 24 £140 ex. VAT
25 to 36 £210 ex. VAT
37 to 48 £280 ex. VAT
49 to 60 £350 ex. VAT
61+ £420 ex. VAT
Thermafleece CosyWool Slab, Thermafleece UltraWool & Thermafleece NatraHemp
1 £30 ex. VAT
2 £60 ex. VAT
3 to 4 £70 ex. VAT
5 to 8 £140 ex. VAT
9 to 12 £210 ex. VAT
13 to 16 £280 ex. VAT
17 to 20 £350 ex. VAT
21+ £420 ex. VAT

Express Delivery

ORDER VALUE DELIVERY CHARGE
Under £300 ex. VAT £75 ex. VAT
Over £300 ex. VAT £50 ex. VAT

This charge is based on delivery to mainland UK excluding the Scottish Highlands. If your delivery address is in the Scottish Highlands a member of our customer service team will contact you prior to processing your order should an additional delivery charge apply. We do not offer deliveries outside the UK mainland.

View Full Delivery Policy

Returns

We offer a 30 day returns policy on any faulty products.

View Full Returns Policy

Key Features

  • Easy to install, handle and cut
  • Can be fixed using screws or by dot and dabbing with plasterboard adhesive
  • Suitable for direct decoration
  • High resistance to deformation
  • Cost-effective choice for reducing airborne sounds such as speech 
  • Suitable for gypsum finishing plasters

Technical Specification

Technical Specification
Material Type:Gypsum
Thickness:12.5mm
Width:1200mm
Length:2400mm
Sales Unit:Sheet
Sales Unit Coverage:2.88m2
Brand:Siniat
Manufacturer's Reference:90579
Weight:8.4kg/m2
Thermal Conductivity:0.19W/mK
Edge:Tapered
Colour:Ivory

Fed up with the headache of applying plaster? Apply in an instant with GTEC Standard Board. GTEC standard board is a classic gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings. 

Available in both square or tapered edges, these tapered edge boards are suitable to receive gypsum plaster finish and are ideal for both jointing and skimming, creating an invisible seam at the point where the edges meet.

Comprising an aerated calcium sulphate core enclosed encased in a tough paper with bound edges (bound by a PVA edge glue), GTEC 12.5mm Tapered Edge Plasterboards measure 2400 x 1200 x 12.5mm and are a no-nonsense alternative to wet plastering. 


12.5mm Siniat GTEC Standard Board Plasterboard Tapered Edge Applications

Look no further than GTEC standard plasterboard for drylining partitions, linings and ceilings where normal fire, structural and acoustic levels are specified. The GTEC boards make drylining internal walls and ceilings a simple and manageable task. Unlike wet plaster, you do not need to be an expert to apply it. Granted you have patience and time to spare, installing plasterboard is more than doable for beginners and seasoned builders alike. 

We recommend GTEC Standard Plasterboard for the following applications:

  • Metal and Timber partition wall applications
  • Wall linings
  • Ceiling applications


12.5mm Siniat GTEC Standard Board Tapered Edge Specifications

Get the job done with 12.5mm Siniat GTEC Standard Board. GTEC boards are a no-fuss alternative to traditional lath and plaster; once the boards are installed, you can go about decorating immediately - no waiting around for things to dry. The boards are suitable for direct application and decoration and feature an ivory paper face that accepts a wide range of paint and finishing products. They may be drylining focused but the boards offer many benefits.

Let's dive into the specs:

  • Available for new builds or refurbishments
  • Easy to install, handle and cut
  • Can be fixed using screws or by dot and dabbing with plasterboard adhesive
  • Suitable for direct decoration
  • High resistance to deformation
  • Cost-effective choice for reducing noise transmission, particularly airborne sounds such as speech 
  • Suitable for gypsum finishing plasters
  • Available in a wide range of sizes to minimise waste
  • Sheet Sales Unit Coverage : 1.62m2
  • Technical Specification Thickness : 12.5mm


For further details, please refer to the manufacturer datasheet in 'Technical Downloads'.

12.5mm Siniat GTEC Standard Board Tapered Edge Certifications

  • Fire Reaction Class: A2-s1,d0
    Complies with BS EN 520:2004+A1:2009 Type A
    Water Vapour Resistance Factor: µ = 10 to BS EN 12524
    Nail & screw pull through: > 300 N

12.5mm Siniat GTEC Standard Board Tapered Edge Jointing & Finishing

  • GTEC Standard Board is designed to and should be jointed and finished with GTEC Jointing Systems
    Boards are suitable for gypsum finishing plasters which are manufactured to BS EN 13279-1:2008
    Ivory face is purposed for decorating - boards should be primed with GTEC Universal Sealer before decorating

Square Edge & Tapered Edge - What's The Difference?

Tapered edge boards are suitable for taping and jointing to achieve a flush finish or for a single coat gypsum plaster finish.

We recommend using square edge boards for textured finishes or undecorated applications. They are also purposed to receive a gypsum plaster finish.

About Siniat

Siniat is one of three main manufacturers of plasterboard in the UK and forms part of the 60-brand strong, industrial group Etex. Siniat manufacturers drywall products and systems for partitions, ceilings, wall linings and external sheathing purposes. Showcasing a vast range of products which reflect a host of projects and budgets, you can be certain that when you choose Siniat, you are investing in years of experience and expertise.

Reviews

5
4
3
2
1
0/5 based on 0 reviews

Leave a Review

Related Articles

How To Cut Plasterboard: A Step-by-Step Guide

How To Fix Plasterboard

What Is Dot and Dab?

All Categories

Services