12.5mm Siniat GTEC Standard Board Square Edge Plasterboard 1800mm x 900mm

GTEC Standard Board is your typical gypsum board, meeting normal fire, structural and acoustic level requirements in partitions, linings and ceilings. 

Available in both square or tapered edges in a variety of sizes, these square edge boards are perfect for textured finishes or undecorated applications as well as being suitable to receive gypsum plaster. 

GTEC 12.5mm Square Edge Plasterboards, also known as "baby boards", are small in size and measure 1800mm x 900mm x 12.5mm. 

12.5mm Siniat GTEC Standard Board Square Edge Applications

Ideal for partitions, linings and ceilings where normal fire, structural and acoustic levels are specified, these GTEC boards do a cracking job of drylining internal walls and ceilings within residential and commercial buildings.

We recommend 12.5mm Siniat GTEC Standard Board for the following applications: 

• Metal and Timber partition wall applications
• Wall linings
• Ceiling applications

12.5mm Siniat GTEC Standard Board Square Edge Specifications

Get professional results every time with 12.5mm Siniat GTEC Standard Board. GTEC boards make life easy; once the boards are installed, you can go about decorating immediately - no hold-up. Designed for direct application and decoration, these boards showcase an ivory paper face that accepts a wide range of paint and finishing products. 

Let's get into the specs: 

• Available for new builds or refurbishments
• Easy to install, handle and cut
• Can be fixed using screws or by dot and dabbing with plasterboard adhesive
• Suitable for direct decoration
• High resistance to deformation
• Cost-effective choice for reducing noise transmission, particularly airborne sounds such as speech 
• Suitable for gypsum finishing plasters 
• Sheet Sales Unit Coverage: 1.62m2
• Technical Specification Thickness: 12.5mm

12.5mm Siniat GTEC Standard Board Square Edge Certifications 

• Fire Reaction Class: A2-s1,d0
• Complies with BS EN 520:2004+A1:2009 Type A
• Water Vapour Resistance Factor: µ = 10 to BS EN 12524
• Nail & screw pull through: > 300 N 

12.5mm Siniat GTEC Standard Board Square Edge Jointing & Finishing 

• GTEC Standard Board is designed to and should be jointed and finished with GTEC Jointing Systems
  Boards are suitable for gypsum finishing plasters which are manufactured to BS EN 13279-1:2008
  Ivory face is purposed for decorating - boards should be primed with GTEC Universal Sealer before decorating
  
  

Square Edge & Tapered Edge - What's The Difference? 

Tapered edge boards are suitable for taping and jointing to achieve a flush finish or for a single coat gypsum plaster finish. 

Square edge boards are suitable for textured finishes or undecorated applications, as well as being purposed to receive a gypsum plaster finish.

About Siniat 

Siniat is one of three main manufacturers of plasterboard in the UK and forms part of the 60-brand strong, industrial group Etex. Siniat manufacturers drywall products and systems for partitions, ceilings, wall linings and external sheathing purposes. Showcasing a vast range of products which reflect a host of projects and budgets, you can be certain that when you choose Siniat, you are investing in years of experience and expertise.