150mm Knauf Loft Roll 44 Insulation Combi-Cut (9.18m2/Roll)

£29.55ex. VAT £3.22 per m2
£29.55ex. VAT
£3.22 per m2

Express Delivery

Mon 8 Jun

Standard Delivery

Tue 9 Jun

Order by 2pm tomorrow
  • 21hrs
  • 15mins
  • 59secs

Delivery & Returns Info

lock Secure checkout (powered by Stripe)

Make 3 payments of £9.85 with PayPal Learn more
Make 3 payments of £9.85 with Klarna Learn more
Make 4 payments of £7.39 with Clearpay Learn more

Delivery & Returns Information

Delivery charges vary by product category and order value. Items may ship from different suppliers and arrive separately, so delivery charges can be shown per part of your order at checkout.

Standard (Nationwide) Delivery

Core Products
Core
ORDER VALUE DELIVERY CHARGE
Under £300 ex. VAT £30 ex. VAT
Over £300 ex. VAT FREE

Core Delivery charges apply only when all products in an order that have equivalents are accepted as such. If even one product cannot be substituted with an equivalent, the entire order will not qualify for Core Delivery charges.

Insulation, Plasterboard and Drylining Products
ORDER VALUE DELIVERY CHARGE
Under £400 £45 ex. VAT
Over £400 ex. VAT FREE

Express Delivery

Express Delivery - Insulation and Plasterboard & Drylining
ORDER VALUE DELIVERY CHARGE
Under £400 £90 ex. VAT
Over £400 ex. VAT £55 ex. VAT

View Full Delivery Policy

How delivery works

We work with a nationwide network of trusted suppliers. Items in your basket may be supplied by different suppliers and delivered separately. Where this applies, you will see delivery charges shown at checkout for each part of your order. We always aim to group products from the same supplier to keep delivery costs as low as possible.

Delivery areas

Delivery charges apply to mainland UK, excluding: AB, CA, CF, DD, DG, EH, EX, FK, KA, KW, KY, IV, LA, LD, LL, ML, NP, PA, PH, PL, SA, SY, TR, TQ and TD.

If your address is in one of these areas, we will contact you before processing your order to confirm any additional costs. We do not currently offer delivery outside the UK mainland.

What to expect on delivery day

  • Deliveries are typically kerbside.
  • Please ensure someone is on-site to accept delivery. For heavier items, help with offloading may be required.
  • Many building materials arrive on large vehicles. If access is restricted, a specialist vehicle such as a HIAB may be required and could incur an additional charge.

Why delivery can cost more than typical parcel delivery

Building materials often travel on larger vehicles and usually carry fewer drops per run than parcel networks. That is why delivery charges can be higher than standard e-commerce shipping.

Returns

Returns depend on what you have bought and whether there is anything wrong with it. For full details on eligibility, timeframes, and exclusions, please see our full policy.

View Full Returns Policy


Key Features

  • {{home}} Use in floors and pitched roofs
  • {{local_fire_department}} A1 non-combustible
  • {{thermostat}} 0.044 W/mK thermal conductivity
  • {{build}} Easy to handle and install
  • {{content_cut}} Ready-cut for use at 600mm or 400mm centres
  • {{public}} Zero Ozone Depletion Potential (ODP)

Technical Specification

Technical Specification
URN: 3003047
Brand: Knauf Insulation
Material Type: Glass Mineral
Thickness: 150mm
Width: 1140mm
Length: 8050mm
Sales Unit: Roll
Sales Unit Coverage: 9.18m2
Fire Rating: A1 Non-Combustible
Thermal Conductivity: 0.044W/mK
Manufacturer's Reference: 2404155

Product Overview

Glass mineral wool insulation roll, measuring 150mm in thickness and supplied in a combi-cut format for loft applications.

Manufactured using ECOSE® Technology with a high recycled content, the roll combines effective thermal insulation with a reduced environmental impact.

Combi-cut part-splits allow installation as either 2 × 570mm or 3 × 380mm widths, aligning with both 400mm and 600mm joist centres for straightforward fitting and minimal waste.

The flexible composition adapts to minor surface irregularities and knits together at joins, helping to maintain continuous coverage without gaps.

With a thermal conductivity of 0.044 W/mK and a Euroclass A1 non-combustible rating, the roll delivers dependable thermal performance and the highest level of fire safety.

At 150mm thick, it is well suited for use as a primary layer between loft joists, and can also be combined with a top-up layer to meet or exceed current Building Regulation targets.

Features & Benefits

  • Glass mineral wool composition: Provides dependable acoustic absorption alongside strong thermal insulation.
  • Made from recycled glass: High recycled content supports sustainability and reduces environmental impact.
  • ECOSE® Technology: Uses a formaldehyde-free binder for improved indoor air quality and lower embodied energy.
  • Combi-Cut flexibility: Pre-split to suit both 400mm and 600mm joist centres, reducing waste and speeding up installation.
  • Resilient quilt form: Recovers thickness after compression, ensuring consistent thermal performance.
  • Adapts to surfaces: Conforms to slight irregularities in the substrate to improve coverage.
  • Knits together in place: Quilts interlock to minimise air gaps, maintaining reliable performance across the loft area.
  • Euroclass A1 fire rating: Non-combustible for maximum fire safety within the building fabric.
  • Thermal conductivity 0.044 W/mK: Ensures effective heat retention, supporting energy savings.
  • Lightweight and flexible: Easy to handle, carry, and fit in confined loft spaces.
  • 150mm thickness: Excellent thermal performance for single-layer loft applications.

Applications

  • Primary loft insulation: Installed between timber joists at ceiling level as the main insulation layer.
  • Top-up option: Can be combined with other layers to reach required overall depth.
  • Pitched roofs at ceiling level: Designed for cold roof applications between and across joists.
  • Overlay insulation: May be cross-laid above joists to improve thermal resistance and reduce bridging.
  • Suspended timber floors: Can also be used between joists in timber floor systems where extra depth is acceptable.

Installation Guidance

  • Install between joists as first layer: Creates base thermal coverage.
  • Lay second layer at right angles: Enhances performance by reducing gaps.
  • Ensure tight fit with no voids: Maintains insulation continuity.

Compliance & Performance

  • BS EN 13162 certified: Meets requirements for mineral wool insulation products.
  • Euroclass A1 fire rating: Fully non-combustible material.
  • Generic BRE Green Guide rating A+: Recognised as environmentally preferable.
  • Zero ODP and Zero GWP: Contains no ozone-depleting or greenhouse gas substances.
  • DECLARE Red List Free label: Free from formaldehyde, phenol, and other restricted substances.



Customer Reviews

5
4
3
2
1
5/5 based on 1 review

Only needed two so Cira was able to get a courier providing shipping. She was also able to guarantee availability for two weeks time and I couldn't have been happier with the product and service!

Ben Cressida on

Leave a Review


Questions and Answers

No questions have been asked about this product yet. Be the first to ask!

Have a question or an answer about this product?

Sign In or Sign Up. Sign In or Sign Up to contribute.


Related Articles

How to Insulate a Loft

How To Cut Insulation Rolls

All Categories

Services