.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
1 Review
View Product Reviews100mm Celcon H+H Standard Grade Plain Face 3.6N Block
100mm Celcon H+H Standard Grade Plain Face 3.6N Block can be used below DPC, as infill for beam and block flooring, as well as above the ground in wall applications.
Nationwide Delivery
Tue 24 Jun
- 0days
- 23hrs
- 58mins
- 57secs
Product Overview
100mm Celcon H+H Standard Grade Plain Face 3.6N Block can be used below DPC, as infill for beam and block flooring, as well as above the ground in wall applications.
Delivery & Returns Information
All delivery charges are shown in your basket and are dependent on the total value of items in your basket based on product category.
This charge is based on delivery to mainland UK excluding the following postcodes: AB, CF, DD, DG, KW, IV, LD, LL, NP, PH, SA and SY. If your delivery address is in any of these postcode areas a member of our customer service team will contact you prior to processing your order should an additional delivery charge apply. We do not offer deliveries outside the UK mainland.
Standard (Nationwide) Delivery
Core Products Core
|
|
---|---|
ORDER VALUE | DELIVERY CHARGE |
Under £300 ex. VAT | £25 ex. VAT |
Over £300 ex. VAT | FREE |
Core Delivery charges apply only when all products in an order that have equivalents are accepted as such. If even one product cannot be substituted with an equivalent, the entire order will not qualify for Core Delivery charges.
Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
---|---|
ORDER VALUE | DELIVERY CHARGE |
Under £100 | £20 ex. VAT |
Between £100 - £250 ex. VAT | £15 ex. VAT |
Over £250 ex. VAT | FREE |
Insulation, Plasterboard and Drylining Products | |
ORDER VALUE | DELIVERY CHARGE |
Under £150 | £50 ex. VAT |
Between £150 - £400 ex. VAT | £35 ex. VAT |
Over £400 ex. VAT | FREE |
SuperFOIL and YBS products | |
ORDER VALUE | DELIVERY CHARGE |
Each item | £10 ex. VAT |
Over £350 ex. VAT of 1 brand | FREE |
Screws & Fixings and Adhesives & Sealants | |
ORDER VALUE | DELIVERY CHARGE |
Under £100 | £7.50 ex. VAT |
Over £100 ex. VAT | FREE |
Express Delivery
Express Delivery - Insulation and Plasterboard & Drylining | |
---|---|
ORDER VALUE | DELIVERY CHARGE |
Under £400 | £50 ex. VAT |
Over £400 ex. VAT | £35 ex. VAT |
Express Delivery - Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
ORDER VALUE | DELIVERY CHARGE |
Under £300 | £50 ex. VAT |
Over £300 ex. VAT | £35 ex. VAT |
Returns
We offer a 30 day returns policy on any faulty products.
Key Features
- {{open_in_full}} Suitable below and above ground
- {{thermostat}} Excellent thermal insulation properties
- {{local_fire_department}} Fire resistant (Euroclass A1 rated)
- {{apps}} Versatile across all wall types
Technical Specification
Thickness: | 100mm |
---|---|
Length: | 440mm |
Height: | 215mm |
Sales Unit: | Each |
Brand: | Celcon |
Manufacturer's Reference: | SRC100100 |
Weight: | 5.68kg |
Compressive Strength: | 3.6N |
Thermal Conductivity: | 0.15W/mK |
Technical Downloads
Orders large enough to require a pallet will require a £20 ex VAT refundable pallet charge to be paid per pallet. Our customer service team will reach out to you if this applies to your order.
What Are 100mm Celcon Blocks?
The 100mm Celcon Standard Grade Plain Face Block is a lightweight, high-performance aircrete block designed to simplify construction without compromising on structural integrity or regulatory compliance.
With a compressive strength of 3.6N/mm² and a low thermal conductivity of 0.15 W/m·K, this block is a versatile option for both load-bearing and non-load-bearing applications across residential, commercial, and multi-storey developments.
Celcon Standard Grade Blocks
Manufactured in the UK by H+H, Celcon blocks are made from precast autoclaved aerated concrete (AAC) - a finely tuned blend of cement, lime, pulverised fuel ash (PFA) or sand, water, and a minute quantity of aluminium powder.
This chemical reaction produces hydrogen gas, which forms countless tiny air pockets, giving the block its lightweight, cellular structure.
Once aerated, the material is set in moulds, cut to size, and steam-cured in autoclaves, resulting in a strong, stable block with excellent thermal and acoustic properties. The average dry density of this product is around 600kg/m³, offering a unique combination of light weight and structural strength.
It is classified as Euroclass A1 (non-combustible) in terms of fire resistance, and is suitable for use both above and below ground level, including areas subject to freeze-thaw exposure.
Applications
- Internal and external leaves of cavity walls
- Solid wall construction
- Foundation walls and below-DPC applications
- Separating walls
- Beam and block floor infill
- Loadbearing and non-loadbearing partitions
- Multi-storey residential and commercial buildings
Benefits
- Versatile: Suitable for use both above and below damp-proof course (DPC), this block simplifies construction by offering a single solution for multiple applications - from external cavity walls to internal partitions.
- Lightweight and Easy to Handle: Weighing just 5.68kg, it supports quicker installation with reduced strain on site workers and improved productivity.
- Strong and Durable: With a compressive strength of 3.6N/mm², it’s ideal for use in residential and commercial projects, including multi-storey buildings.
- Thermal Efficiency: A thermal conductivity rating of 0.15 W/m·K makes this block an excellent contributor to a building’s overall energy performance.
- Minimises Site Confusion: Its suitability for floor, wall, and foundation use eliminates the need for multiple block types, streamlining deliveries and on-site coordination.
- Non-Combustible and Durable: Rated Euroclass A1, the block will not contribute to the spread of fire. Its resistance to freeze-thaw cycles makes it suitable for external and below-ground use.
Customer Reviews
Great blocks!