Split your purchase of £0.93 into 3 with no sign-up fees or late fees.
£0.31
today
£0.31
1 month
£0.31
2 months
How it works
Choose PayPal at checkout to pay later with Pay in 3.
Complete your purchase with the first payment today.
Remaining payments are taken automatically.
Pay in 3 is a form of credit, so carefully consider whether the purchase is affordable and how you will make the repayments. Be aware of the possible impact of using Pay in 3 and of missing payments, including making other borrowing more difficult or more expensive. Pay in 3 eligibility is subject to status and approval. 18+ UK residents only. Available for purchases of £30 to £2,000. Terms and conditions apply. PayPal Pay in 3 is a trading name of PayPal (Europe) S.à r.l. et Cie, S.C.A. 22-24 Boulevard Royal L-2449, Luxembourg.
Get what you need for your next project, choose how you pay.
Pay in 30 days
£0.93
Pay in full
Klarna's Pay in 30 days is an unregulated credit agreement. Borrowing more than you can afford or paying late may negatively impact your financial status and ability to obtain credit. 18+, UK residents only. Subject to status. T&Cs and late fees apply.
Pay over time
£0.31 Every 30 days
Pay in 3
£0.31
today
£0.31
in 30 days
£0.31
in 60 days
Klarna's Pay in 3 is an unregulated credit agreement. Borrowing more than you can afford or paying late may negatively impact your financial status and ability to obtain credit. 18+, UK residents only. Subject to status. T&Cs and late fees apply.
How it works
At checkout select Klarna.
Choose your payment plan.
Different payment plans may be shown depending on the purchase amount and credit score.
Complete your checkout.
The amount will be charged based on the payment plan you chose.
Split your purchase of £0.93 into 4 with no sign-up fees or late fees. Your purchase will be split into 4 payments, payable every 2 weeks
£0.23
today
£0.23
second payment
£0.23
third payment
£0.23
fourth payment
How it works
Choose Clearpay at checkout to pay later with Pay in 4.
Complete your purchase with the first payment today.
Remaining payments are taken automatically.
Clearpay is unregulated credit. Use responsibly. 18+, T&Cs and late fees apply at clearpay.co.uk/en-GB
Clearpay lends you a fixed amount of credit so you can pay for your purchase over 4 instalments, due every 2 weeks. Ensure you can make repayments on time. You must be 18+ and a permanent UK resident (excl Channel Islands). Clearpay charges a £6 late fee for each late instalment and a further £6 if it’s still unpaid 7 days later. Late fees are capped at £6 for orders under £24 and the lower of £24 or 25% of the order value for orders over £24. Missed payments may affect your ability to use Clearpay in the future and your details may be passed onto a debt collection agency working on Clearpay’s behalf. Clearpay is credit that is not regulated by the Financial Conduct Authority. T&Cs and other eligibility criteria apply at clearpay.co.uk/terms
£0.93ex. VAT
Key Features
{{fitness_center}} Manufactured from corrosion-protected steel
{{construction}} Direct fixing to the supporting timber member
{{drag_indicator}} Staggered holes help distribute load
{{settings_ethernet}} Rigid side flanges
Technical Specification
Technical Specification
URN:
7002013
Product:
Standard Leg
Material Type:
Galvanised Steel
Width:
47mm
Length:
272mm
Weight:
0.19kg
Sales Unit:
Each
Fire Rating:
A1 Non-Combustible
Gauge:
0.8mm
Product Overview
A standard-leg timber-to-timber Jiffy joist hanger designed for secure face fixing between structural timber members.
Manufactured from corrosion-protected steel for dependable strength and clean bearing at the seat. The rigid side flanges and optimised nail pattern allow even load distribution into the supporting beam without risk of timber splitting.
Its compact form makes it suitable for flush, accurate installation where service runs or finishes need a neat line. Supplied for joists up to 47mm wide, with a 272mm leg length providing the standard nailing reach used in typical timber-to-timber applications.
Features & Benefits
Face-fix configuration: Allows direct fixing to the supporting timber member for a precise set-out and fast installation.
Defined seat support: Rigid seat gives positive bearing to the supported joist for predictable load transfer and reduced creep.
Standard leg format: Leg length suited to typical timber-to-timber drops without requiring extended nailing lines or additional trimming.
Optimised fastener layout: Staggered holes help distribute load and reduce the risk of timber splitting when correctly nailed or screwed.
Material and finish: Supplied in corrosion-protected steel suitable for internal structural timber use; select finish to suit the service class.
Application suitability: 47mm width suits standard 44-47mm joists; 272mm leg length provides conventional nailing reach for timber-to-timber work.
Applications
Floor joists to beams: Supporting 44-47mm softwood joists from timber beams in internal floors.
Ceiling joists to binders: Hanging 47mm ceiling members from timber binders where a standard leg is adequate.
Trimmers and headers: Forming trimmer/header connections around openings with 47mm joists.
Studwork and noggins: Creating 47mm secondary members where face-fix hangers give a cleaner junction.
Installation Guidance
Set out and mark: Offer the hanger to the line, mark top and sides, and ensure the seat is level to the design datum.
Fix supporting member first: Install all specified fasteners in the supporting member leg before seating the joist.
Seat and secure joist: Fully bear the joist on the seat and fix through the side flanges per the specified nailing/screwing schedule.
Maintain edge distances: Keep fasteners within the hole pattern and observe minimum end and edge distances for timber.
Final checks: Confirm full bearing, no gaps at the seat, and that all holes required by the schedule are filled.
Corrosion protection: Select coating or material grade appropriate to the service class and environment as defined by the designer.
Design responsibility: Designer to verify loads, timber grade, and fixings to suit the project’s requirements.
Important note: Do not modify the hanger; use only specified fasteners.
Delivery & Returns Information
Delivery charges vary by product category and order value. Items may ship from different suppliers and arrive separately, so delivery charges can be shown per part of your order at checkout.
Standard (Nationwide) Delivery
Screws & Fixings and Adhesives & Sealants
ORDER VALUE
DELIVERY CHARGE
Under
£75
£7.50
ex. VAT
Over
£75
ex. VAT
FREE
Express Delivery
Express Delivery - Insulation and Plasterboard & Drylining
ORDER VALUE
DELIVERY CHARGE
Under
£400
£90
ex. VAT
Over
£400
ex. VAT
£55
ex. VAT
Express Delivery - Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products
We work with a nationwide network of trusted suppliers. Items in your basket may be supplied by different suppliers and delivered separately. Where this applies, you will see delivery charges shown at checkout for each part of your order. We always aim to group products from the same supplier to keep delivery costs as low as possible.
Delivery areas
Delivery charges apply to mainland UK, excluding: AB, CA, CF, DD, DG, EH, EX, FK, KA, KW, KY, IV, LA, LD, LL, ML, NP, PA, PH, PL, SA, SY, TR, TQ and TD.
If your address is in one of these areas, we will contact you before processing your order to confirm any additional costs. We do not currently offer delivery outside the UK mainland.
What to expect on delivery day
Deliveries are typically kerbside.
Please ensure someone is on-site to accept delivery. For heavier items, help with offloading may be required.
Many building materials arrive on large vehicles. If access is restricted, a specialist vehicle such as a HIAB may be required and could incur an additional charge.
Why delivery can cost more than typical parcel delivery
Building materials often travel on larger vehicles and usually carry fewer drops per run than parcel networks. That is why delivery charges can be higher than standard e-commerce shipping.
Returns
Returns depend on what you have bought and whether there is anything wrong with it. For full details on eligibility, timeframes, and exclusions, please see our full policy.
i am using 47 x 100 (4 x 2) joist is this hanger the correct one, if not which one do i need
Yes, this is the correct joist hanger provided you are connecting timber joist to timber joist. If the connection is timber joist to masonry, their are Masonry Joist Hangers for that application which you can find on our website.
Can this be used with the 6x2 timber
Yes, this product is the correct one to use with 6x2 timber provided that the connection detail is timber to timber as shown in the product image. If you are connecting joists to a masonry wall a different joist hanger is required - URN: 7002021.
Can this be used with the 6x4 timber
No, this joist hanger is suitable only for 47mm (equivalent to 2 inches) wide joists. The correct product to use for a 6x4 timber joist is as follows:
- 100mm x 245mm Standard Leg Timber to Timber Jiffy Joist Hanger URN: 7002015 - if the connection detail is timber to timber
- 100mm x 150mm Standard Masonry Joist Hanger URN: 7002032 - if the connection details is timber to masonry
Our product images are very helpful in making the correct selection.
Is 272mm the maximum length? I'll be using them on 200mm joists to hang 150mm joists.
No, there is a longer 47mm x 479mm Long Leg Timber to Timber Jiffy Joist Hanger available.
However, as the joist that you are using the hanger for is 150mm, then the 272mm size should be more than adequate, and could be used for 200mm joists as well.
Learn more
Learn more
Learn more
