

110mm Spare Blanking Plug
110mm blanking plug for underground drainage. Suitable for temporary closure during works or permanent system isolation. Push-fit design seals open pipe ends.
Nationwide Delivery
Thu 16 Oct
- 2days
- 20hrs
- 59mins
- 3secs
Product Overview
110mm blanking plug for underground drainage. Suitable for temporary closure during works or permanent system isolation. Push-fit design seals open pipe ends.
Delivery & Returns Information
How Our Delivery Works
We work with a nationwide network of trusted suppliers. As a result, items in your basket may be supplied by different suppliers and delivered separately. Where this applies, you'll see multiple delivery charges at checkout. We always aim to group products from the same supplier to keep delivery costs as low as possible.
Delivery Areas & Charges
Delivery charges listed on our website apply to mainland UK, excluding the following postcode areas: AB, CF, DD, DG, FK, KW, IV, LA, LD, LL, NP, PA, PH, SA, SY
If your delivery address falls within one of these postcode areas, we’ll be in touch before processing your order to confirm any additional delivery costs.
Please note: We do not currently offer delivery outside the UK mainland.
Standard (Nationwide) Delivery
Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
---|---|
ORDER VALUE | DELIVERY CHARGE |
Under £300 | £10 ex. VAT |
Over £300 ex. VAT | FREE |
Insulation, Plasterboard and Drylining Products | |
ORDER VALUE | DELIVERY CHARGE |
Under £350 | £35 ex. VAT |
Over £350 ex. VAT | FREE |
Screws & Fixings and Adhesives & Sealants | |
ORDER VALUE | DELIVERY CHARGE |
Under £50 | £5 ex. VAT |
Over £50 ex. VAT | FREE |
Express Delivery
Express Delivery - Insulation and Plasterboard & Drylining | |
---|---|
ORDER VALUE | DELIVERY CHARGE |
Under £400 | £50 ex. VAT |
Over £400 ex. VAT | £35 ex. VAT |
Express Delivery - Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
ORDER VALUE | DELIVERY CHARGE |
Under £300 | £50 ex. VAT |
Over £300 ex. VAT | £35 ex. VAT |
Returns
We offer a 30 day returns policy on any faulty products.
Key Features
- {{all_out}} Seals pipework during air or water pressure testing
- {{table_bar}} Provides a watertight seal for unused 110mm pipe ends
- {{fitness_center}} Manufactured from durable uPVC
- {{fiber_smart_record}} Prevents water ingress and debris from entering the system
Technical Specification
Material Type: | PVC |
---|---|
Sales Unit: | Each |
Diameter: | 110mm |
Product Overview
110mm Spare Blanking Plug designed to seal the end of an underground drainage pipe. It provides a watertight closure, either as a temporary stop during installation and testing or as a permanent cap to isolate unused pipe runs.
Manufactured from durable uPVC to BS EN 1401-1 standards, the blanking plug is resistant to corrosion, rot, and ground chemicals.
Its simple push-fit design allows quick installation without adhesives or mechanical fixings, ensuring secure performance in both foul and surface water drainage systems.
Commonly used during staged works, the plug prevents water ingress, debris accumulation, or foul odours from escaping unfinished pipework, maintaining system integrity until full connection is required.
Features & Benefits
- Pipe end closure: Seals 110mm pipe ends securely in underground systems.
- Temporary or permanent use: Suitable for short-term works or long-term isolation.
- Watertight seal: Prevents leakage, odours, and debris entry.
- Push-fit design: Quick to fit and remove without specialist tools.
- Durable uPVC construction: Resistant to weathering, ground movement, and chemicals.
- Standards compliant: Compatible with BS EN 1401-1 drainage components.
Applications
- System testing: Caps pipe ends during air or water pressure tests.
- Staged installations: Temporarily seals open pipes while further works are completed.
- Permanent isolation: Caps redundant or unused drainage runs.
- Blockage prevention: Stops debris entering open pipework during construction.
Installation Guidance
- Preparation: Ensure pipe end is cut square, clean, and free from debris.
- Fitting: Push plug firmly into the pipe until seated against the seal.
- Testing: Check joint integrity where plugs are used for pressure testing.
- Removal: Withdraw plug by hand if re-access to the pipe is required.
- Backfilling: Support sealed pipe ends with granular material before final backfill.
Compliance & Performance
- Standard: BS EN 1401-1 compatible.
- Size: 110mm plug for plain-ended pipes.
- Type: Spare blanking plug.
- Material: uPVC.
- Applications: Underground foul and surface water drainage.
- Durability: Resistant to long-term ground contact, chemicals, and weathering.