

Nationwide Delivery
Tue 9 Jun
- 0days
- 12hrs
- 14mins
- 38secs
lock Secure checkout (powered by Stripe)
Delivery & Returns Information
Delivery charges vary by product category and order value. Items may ship from different suppliers and arrive separately, so delivery charges can be shown per part of your order at checkout.
Standard (Nationwide) Delivery
| Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
|---|---|
| ORDER VALUE | DELIVERY CHARGE |
| Under £300 | £25 ex. VAT |
| Over £300 ex. VAT | FREE |
Express Delivery
| Express Delivery - Insulation and Plasterboard & Drylining | |
|---|---|
| ORDER VALUE | DELIVERY CHARGE |
| Under £400 | £90 ex. VAT |
| Over £400 ex. VAT | £55 ex. VAT |
| Express Delivery - Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products | |
| ORDER VALUE | DELIVERY CHARGE |
| Under £300 | £50 ex. VAT |
| Over £300 ex. VAT | £35 ex. VAT |
How delivery works
We work with a nationwide network of trusted suppliers. Items in your basket may be supplied by different suppliers and delivered separately. Where this applies, you will see delivery charges shown at checkout for each part of your order. We always aim to group products from the same supplier to keep delivery costs as low as possible.
Delivery areas
Delivery charges apply to mainland UK, excluding: AB, CA, CF, DD, DG, EH, EX, FK, KA, KW, KY, IV, LA, LD, LL, ML, NP, PA, PH, PL, SA, SY, TR, TQ and TD.
If your address is in one of these areas, we will contact you before processing your order to confirm any additional costs. We do not currently offer delivery outside the UK mainland.
What to expect on delivery day
- Deliveries are typically kerbside.
- Please ensure someone is on-site to accept delivery. For heavier items, help with offloading may be required.
- Many building materials arrive on large vehicles. If access is restricted, a specialist vehicle such as a HIAB may be required and could incur an additional charge.
Why delivery can cost more than typical parcel delivery
Building materials often travel on larger vehicles and usually carry fewer drops per run than parcel networks. That is why delivery charges can be higher than standard e-commerce shipping.
Returns
Returns depend on what you have bought and whether there is anything wrong with it. For full details on eligibility, timeframes, and exclusions, please see our full policy.
Key Features
- {{all_out}} Seals pipework during air or water pressure testing
- {{table_bar}} Provides a watertight seal for unused 110mm sockets
- {{fitness_center}} Manufactured from durable uPVC
- {{fiber_smart_record}} Prevents water ingress and debris from entering the system
Technical Specification
| URN: | 7001049 |
|---|---|
| Material Type: | PVC |
| Diameter: | 110mm |
| Sales Unit: | Each |
Product Overview
110mm Socket Plug designed to seal the socket of an underground drainage fitting or pipe, either permanently or temporarily during installation and testing. By closing off unused sockets, it prevents water ingress, foul odours, and debris from entering the system.
Manufactured from durable uPVC and available in grey, white, or anthracite finishes, the plug fits directly into 110mm push-fit sockets to create a secure, watertight seal without the need for specialist tools.
Socket plugs are commonly used to cap future connection points, isolate branches during construction, or close off lines for air or water pressure testing, ensuring flexibility and reliability in underground drainage layouts.
Features & Benefits
- Secure closure: Provides a watertight seal for unused 110mm sockets.
- Temporary or permanent use: Suitable for capping during installation, testing, or long-term isolation.
- Durable uPVC: Resistant to rot, corrosion, and ground chemicals for reliable performance.
- Push-fit design: Installs quickly without adhesives or mechanical fixings.
- Colour choice: Available in grey, white, or anthracite to match existing fittings.
- System compatibility: Fits all standard 110mm underground drainage sockets.
Applications
- System testing: Seals pipework during air or water pressure testing.
- Unused branches: Closes off future connections in underground layouts.
- Temporary isolation: Provides a quick closure point during staged installation.
- Permanent sealing: Caps redundant sockets or fittings to prevent infiltration.
Installation Guidance
- Preparation: Ensure socket is clean and free of debris.
- Fitting: Insert plug firmly into the 110mm socket until fully seated against the seal.
- Testing: For pressure tests, confirm the seal holds without movement or leakage.
- Removal: If temporary, simply withdraw by hand when the socket is required.
- Backfilling: Ensure capped sockets are adequately supported before final backfill.
Compliance & Performance
- Standard: Compatible with BS EN 1401-1 fittings.
- Size: 110mm socket plug.
- Material: uPVC.
- Colours: Grey, white, anthracite.
- Applications: Underground foul and surface water drainage.
- Durability: Resistant to chemicals, weathering, and long-term burial.