47mm x 67mm Minor Mini Joist Hanger

£0.81ex. VAT
£0.81ex. VAT

Nationwide Delivery

Fri 19 Jun

Order by 2pm today
  • 11hrs
  • 24mins
  • 26secs

Delivery & Returns Info
Bulk Prices
63+ units 126+ units 186+ units
£0.77ex. VAT £0.75ex. VAT £0.73ex. VAT

Nationwide Delivery

Fri 19 Jun

Order by 2pm today
  • 11hrs
  • 24mins
  • 26secs

Delivery & Returns Info

lock Secure checkout (powered by Stripe)

Make 3 payments of £0.27 with PayPal Learn more
Make 3 payments of £0.27 with Klarna Learn more
Make 4 payments of £0.20 with Clearpay Learn more

Delivery & Returns Information

Delivery charges vary by product category and order value. Items may ship from different suppliers and arrive separately, so delivery charges can be shown per part of your order at checkout.

Standard (Nationwide) Delivery

Screws & Fixings and Adhesives & Sealants
ORDER VALUE DELIVERY CHARGE
Under £75 £7.50 ex. VAT
Over £75 ex. VAT FREE

Express Delivery

Express Delivery - Insulation and Plasterboard & Drylining
ORDER VALUE DELIVERY CHARGE
Under £400 £90 ex. VAT
Over £400 ex. VAT £55 ex. VAT
Express Delivery - Timber & Sheet, Building Materials, Joinery and Gardens & Landscaping Products
ORDER VALUE DELIVERY CHARGE
Under £300 £50 ex. VAT
Over £300 ex. VAT £35 ex. VAT

View Full Delivery Policy

How delivery works

We work with a nationwide network of trusted suppliers. Items in your basket may be supplied by different suppliers and delivered separately. Where this applies, you will see delivery charges shown at checkout for each part of your order. We always aim to group products from the same supplier to keep delivery costs as low as possible.

Delivery areas

Delivery charges apply to mainland UK, excluding: AB, CA, CF, DD, DG, EH, EX, FK, KA, KW, KY, IV, LA, LD, LL, ML, NP, PA, PH, PL, SA, SY, TR, TQ and TD.

If your address is in one of these areas, we will contact you before processing your order to confirm any additional costs. We do not currently offer delivery outside the UK mainland.

What to expect on delivery day

  • Deliveries are typically kerbside.
  • Please ensure someone is on-site to accept delivery. For heavier items, help with offloading may be required.
  • Many building materials arrive on large vehicles. If access is restricted, a specialist vehicle such as a HIAB may be required and could incur an additional charge.

Why delivery can cost more than typical parcel delivery

Building materials often travel on larger vehicles and usually carry fewer drops per run than parcel networks. That is why delivery charges can be higher than standard e-commerce shipping.

Returns

Returns depend on what you have bought and whether there is anything wrong with it. For full details on eligibility, timeframes, and exclusions, please see our full policy.

View Full Returns Policy


Key Features

  • {{fitness_center}} Manufactured from galvanised steel
  • {{check_circle}} Precision-formed flanges
  • {{settings_ethernet}} For light-duty timber-to-timber connections
  • {{fullscreen_exit}} For small-span timber members

Technical Specification

Technical Specification
URN: 7002012
Material Type: Galvanised Steel
Width: 47mm
Length: 67mm
Weight: 0.096kg
Sales Unit: Each
Fire Rating: A1 Non-Combustible
Gauge: 0.9mm

Product Overview

Galvanised mini joist hanger engineered to fit 47mm-wide timber - the finished size of standard 50mm nominal sections typically used in C16 or C24 structural grades, such as 47 × 100mm joists.

Manufactured from galvanised steel for light-duty timber-to-timber connections, it provides a compact and durable solution for fixing small joists, trimmers, or noggins. 

The galvanised zinc coating offers effective corrosion protection, extending service life in internal environments. Precision-formed flanges and pre-punched nail holes ensure consistent alignment and secure bearing contact between connected timbers. 

Ideal for use with joists up to approximately 100mm deep, the 47mm width accommodates standard small-section timbers with an accurate, snug fit. 

The 67mm hanger height ensures adequate bearing surface while maintaining a low visual profile for concealed or secondary framing uses.

Features & Benefits

  • Material specification: Galvanised steel manufactured to BS EN 10346 DX51D + Z275 for corrosion resistance and long-term reliability in indoor timber structures.
  • Structural form: Light-duty design suitable for small-span timber members, ensuring reliable support without excessive weight or projection.
  • Pre-punched fixing holes: Allows secure fastening using 30 × 3.75mm square-twist nails or equivalent, ensuring full mechanical engagement with the supporting timber.
  • Compact bearing depth: Provides an effective bearing seat of approximately 40-50mm, allowing efficient load transfer between joist and supporting member.
  • Corrosion protection: Hot-dip galvanised finish resists oxidation and moisture, extending service life under normal interior exposure conditions.


Applications

  • Ceiling joists: Used for light-duty joist fixing in ceilings where space and visual neatness are priorities.
  • Timber trimmers: Suitable for connecting short trimmer joists around ceiling openings or hatches.
  • Partition frames: Ideal for constructing internal studwork or timber partitions using narrow timber members.
  • Light decking: Applied in lightweight decking or platform structures where minimal load-bearing is required.
  • General timber joinery: Effective for small structural links where standard joist hangers would be oversized or visually intrusive.


Installation Guidance

  • Preparation: Ensure both the main and supported timbers are square-cut, dry, and free of debris before fixing.
  • Positioning: Fix the hanger so the 67mm height runs vertically and the 47mm width matches the supported joist width.
  • Fixing: Use 30 × 3.75mm square-twist nails (or approved equivalent) through all pre-punched holes in both the hanger flanges and seat.
  • Joist seating: Insert the joist fully into the hanger so it bears firmly on the base and fits flush against the back flange.
  • Alignment check: Verify the hanger and joist remain level and square before loading or securing additional framing.


Compliance & Performance

  • Material grade: Galvanised steel to BS EN 10346 DX51D + Z275, meeting requirements for corrosion-resistant construction fittings.
  • Load rating: Typical safe working load of approximately 3.47 kN for timber-to-timber connection when fully nailed to specification.
  • Quality assurance: Produced under certified manufacturing control for consistent geometry and pre-punched accuracy.
  • Important note: Designed for light-duty timber framing only - not for primary load-bearing or structural joist support. All fixing holes must be filled with approved nails to achieve rated performance.



Customer Reviews

5
4
3
2
1
0/5 based on 0 reviews

Leave a Review


Questions and Answers

No questions have been asked about this product yet. Be the first to ask!

Have a question or an answer about this product?

Sign In or Sign Up. Sign In or Sign Up to contribute.


Related Articles

How To Build A Decking

All Categories

Services