Show more
Hanson Quickcem is manufactured to a proprietary technical specification and is a Portland cement containing special additives developed to give quick setting and hardening characteristics. Hanson Quickcem is an ideal cement for repair and maintenance applications where the increased rate of set and strength development are beneficial in both mortar and concrete, allowing normal services to be brought back into operation much sooner than with traditional Portland cement.
Show more
Hanson Natural Hydraulic Lime NHL 3,5 moderately hydraulic lime is produced to meet the requirements for mortar, render and plaster for conservation, restoration and new build construction. It conforms to the requirements of BS EN 459-1 type NHL Natural Hydraulic Lime strength class 3,5.
Show more
Hanson Multicem cement is a quality assured Portland Limestone cement manufactured to comply with the requirements of EN 197-1 achieving strength class 32,5R. Hanson Multicem cement is commonly used cement for a wide range of applications. These applications cover but are not limited to Multicem concrete, mortar, render and screeds. NOTE where increased resistance to sulfates is required Hanson Low Carbon/Sulfate-Resisting cement should be used.
Show more
Hanson High Strength 52,5N (HS52), is a quality assured Portland cement is manufactured to comply with the requirements of EN 197-1 CEM I strength class 52,5N. Hanson HS52 is a commonly used cement for a wide range of applications. These applications cover but are not limited to, general Ready-Mixed concrete, High Strength Pre-Cast and Pre- Stressed Concretes, Sprayed Concrete, Concrete Block Paving (CBP), Grout, Mortar, Render and Screeds.
Show more
Hanson General Purpose cement is a quality assured Portland Limestone cement manufactured to comply with the requirements of EN 197-1 achieving strength class 32,5R or 42.5N (dependent on the version being manufactured at any given point). Hanson General Purpose cement is commonly used cement for a wide range of applications. These applications cover but are not limited to general purpose concrete, mortar, render and screeds. NOTE where increased resistance to sulfates is required Hanson Low Carbon/Sulfate-Resisting cement should be used.
Show more
Hanson Sand Cement Mortar is prepared by blending Hanson Cement CEM I 52.5N (to BS EN 197), with Regen GGBS (to BS EN 15167) and building sand (conforming to BS EN 13139) and an air entrainment additive (to BS EN 934-2). When hardened the mortar will be brown/red in colour. Hanson Sand Cement Mortar meets the requirements of a category M6 mortar and is CE Marked with independent third party accreditation to BS EN 998-2.
Show more
Hanson Sand Cement Mortar is prepared by blending Hanson Cement CEM I 52.5N (to BS EN 197), with Regen GGBS (to BS EN 15167) and building sand (conforming to BS EN 13139) and an air entrainment additive (to BS EN 934-2). When hardened the mortar will be brown/red in colour. Hanson Sand Cement Mortar meets the requirements of a category M6 mortar and is CE Marked with independent third party accreditation to BS EN 998-2.
Show more
Hanson Multicem cement is a quality assured Portland Limestone cement manufactured to comply with the requirements of EN 197-1 achieving strength class 32,5R. Hanson Multicem cement is commonly used cement for a wide range of applications. These applications cover but are not limited to Multicem concrete, mortar, render and screeds. NOTE where increased resistance to sulfates is required Hanson Low Carbon/Sulfate-Resisting cement should be used.
Show more
Hanson Hydrated Lime is a quality-assured, non-hydraulic hydrated lime produced to meet the requirements for mortar, render and plaster for conservation, restoration and new build construction. It conforms to the high calcium requirements of BS EN 459-1 classification CL 90-S.
Show more
Hanson Lime Putty is a stiff paste composed of a finely divided colloidal dispersion of slaked lime in water. It is available in 17 litre tubs. Hanson Lime Putty is recommended for mixing with clean, well graded sands in the production of mortars, renders and plasters that are ideal for conservation, restoration and new build applications.
Show more
Hanson Sulfate-Resisting Cement is a packed factory produced Portland blast furnace cement manufactured to the requirements of BS EN 197-1 CEM III/A strength class 42,5L. Sulfate-resisting cement is recommended for use in all concrete, mortar and grout below ground or where sulfates are present in concentrations likely to lead to deterioration as described previously (except for class DC-4m).
Show more
Hanson White Portland Cement 52,5R is a quality cement manufactured to comply with the requirements of BS EN 197-1. Hanson White Portland Cement is recommended for use in concrete, mortar and render with or without pigments. The setting and strength characteristics of Hanson White Portland Cement are similar to Grey Portland cements.
Show more